Seawater Reverse Osmosis (SWRO)
LG SW 400 R G2
The next-generation LG SW G2 membranes have achieved record-breaking salt rejection, improving the product quality up to 45% compared with the conventional technology. With enhanced Thin Film Nanocomposite (TFN) technology, LG SW G2 membranes can significantly reduce the cost of desalination.
LG SW R (High Rejection) membranes offer a combination of high rejection and low energy requirements to reduce the total cost of desalination; suitable for medium to high salinity seawater applications.
LG SW G2 Benefits
- Improved permeate quality without increasing operating pressure
- Reduced energy cost without sacrificing the permeate quality
- Reduced capital and operation costs for multi-pass SWRO systems
LG SW 400 R G2
|Active Membrane Area, ft² (m²)||Permeate Flow Rate, GPD (m³/d)||Stabilized Salt Rejection, %||Minimum Salt Rejection, %||Boron Rejection, %||Feed Spacer, mil|
|400 (37)||9,000 (34.1)||99.88||99.75||93||34|
|Test Conditions : 32,000 ppm NaCl, 5 ppm boron at 25°C (77°F), 800 psi (55 bar), pH 8, Recovery 8%.
Permeate flows for individual elements may vary +/-15%.
|Max. Applied pressure||1,200 psi (82.7 bar)|
|Max. Chlorine concentration||< 0.1 ppm|
|Max. Operating temperature||45°C (113°F)|
|pH Range, Continuous (Cleaning)||2 -11 (2 -13)|
|Max. Feedwater turbidity||1.0 NTU|
|Max. Feedwater SDI (15 mins)||5.0|
|Max. Feed flow||75 gpm (17 m3/h)|
|Min. Ratio of concentrate to permeate flow for any element||5 : 1|
|Max. Pressure drop (ΔP) for each element||15 psi (1.0 bar)|